Anti-blocking durability design:
The Tiansuo electric bolt lock has a standby operating current of0.4**, the operating current during locking is also0.4**, this specification is clearly ahead of competing products,
Competing products typically have a standby current for electric bolt locks of0.3A, the operating current during locking is0.9A, which means that if the door does not
reach its position, and the bolt strikes the door edge instead of entering the lock hole, the lock keeps0.9Aoperating current, which keeps
the lock body heats up sharply until the temperature exceeds the chip rating, burning the chip and disabling the lock. If the bolt misses the hole because
Uneven floor-spring ** occurs frequently; most electric-lock failures are caused by excessive lock-body temperature. The Tiansuo electric bolt lock
It has been carefully designed so that the operating and standby currents are always kept low0.4**, the lock-body temperature stays consistent, even when
blocked, which greatly reduces the lock failure rate and ensures durability through leading technology.

Door rushes past the closed position and the bolt retracts automatically:
Because floor-spring ** varies, some glass doors do not close slowly but rush past the closed position and finally shake
a few times before stopping. If the electric bolt lock drops its bolt the first time the door passes the closed position, the door often closes too fast and does not
it hits the lock hole and the bolt stays extended, the door rebounding after slamming shut will hit the bolt hard; over time this will bend the bolt
out of shape, so the door cannot close naturally every time. The Tiansuo electric bolt lock is finely designed: if the bolt misses the lock hole it automatically
retract and waits until the door is in position, effectively removing the user's worries.