Enables networked management of multiple automatic doors in a building, up to 127 units, with a maximum network distance of 1,000 m;

Through the network module, automatic doors on the network are managed from the ** control computer, providing various management functions, including all functions of the operator;

Centralized setting and management of networked automatic doors can be achieved either from the ** control computer or from the operator;

Real-time viewing of the operating status, fault status and operating parameters of the automatic doors;

It can display the working status, maintenance intervals and other parameters of each automatic door on the network;

Self-diagnosis of faults, displayed on the ** control computer with automatic alarm and logging.

Once DCUs are networked, a single operator can **ly monitor the operating parameters of all DCUs on the network. The diagram below shows the monitoring network layout.

 

Option 1: Network monitoring for up to 32 DCUs.

Option 2: Network monitoring for ** than 32 DCUs. An RS485 HUB is required to ** signal reliability.

 

When using Options 1 and 2, note the following for operator networking:

In Option 2, (m¡Án) ¡Ü 127; up to 127 DCUs can be networked.

Transmission medium: shielded twisted pair.

Do not reverse the A and         B polarity.

Add a terminating resistor in the DCU farthest from the operator, and remove the terminating resistors from all other DCUs.

An RS485 HUB provides multiple RS-485 ports; the value of m depends on the selected HUB, typically m=4, 8 or 32.

No single cable may exceed 1,000 m in length.

 

 

Each automatic door comes with one operator as standard. The new operator enables multi-function management, allowing users to view the operating status and fault status of the automatic door and to set operating parameters.

Interfaces are available for access control, seismic detection and fire alarm systems; the interface form can be provided to meet the relevant system requirements.

The door-open delay is automatically adjusted according to pedestrian traffic: when traffic is heavy, the opening time is automatically extended to avoid frequent opening/closing; when traffic decreases, it automatically returns to the set time, saving air-conditioning energy.

Time schedules can be set on the operator. For example, the door can be set to Automatic mode from 8:00 AM to 5:00 PM and to Normally Closed at all other times. Up to four time periods can be set.

Provides dual-door interlock and synchronization interfaces, magnetic lock interface, backup battery interface, and auxiliary light-sensor interface.

6 preset voice prompts are available and can be customized by recording. (Future upgrade)

 

Newly designed controller with a new imported quiet motor; operating noise under 53 dB.

Newly designed European-style track, operator beam and hangers for smooth, derailment-free, safe and reliable operation.