ĦĦĦĦThe TPL3D4 uses a single controller capable of handling 4 doors / 4 card readers.

ĦĦĦĦThe TPL3 handles 2 doors / 4 card readers.

The TPL3(D4) suits the needs of any site and can be connected from a single building to remote multi-site locations via TCP/IP, RS485, RS232 or modem. It supports up to 40,000 cardholders.

ĦĦĦĦSystem programming can be completed within minutes on a general-purpose PC using the user-friendly Quick Access 8 software. Quick Access 8 offers many access control and alarm monitoring functions: card expiry, card entry-count limits, entry/exit counting, automatic activation, double-door interlock, elevator management, time zones, supervision, anti-passback, event reports ...

ĦĦĦĦThe controller network can also be programmed without any computer, via the display and keypad of the main TPL3 controller.

ĦĦĦĦEach alarm input is programmable: operating state (NO or NC), time zone, local linkage (output based on input state), failed-swipe attempts, door-close timeout (door alarm), duress code ...

Overview

Programmed with Quick Access 8 software •TPL3 ¨C 2-door/4-reader controller, and TPL3D4 ¨C 4-door/4-reader controller. •TPL3-DBL is a cost-saving 4-door/8-reader solution, programmed via the main controller (TPL3 without PC). The same applies to TPL3, TPL3D4, TPL3-DBL and TPL3D4-DBL. •The TPL3 main controller has a mini keypad and display for programming. •TPL3 slave controllers have no mini keypad or display. Each controller can be easily upgraded by replacing a chip on the board. The TPL3 series can be combined with the NSL3 in the same installation to provide a cost-optimized solution. Main Features <**> Offline Up to 40,000 cardholders TPL3: 2-door, 4-reader controller TPL3D4: 4-door, 4-reader controller 4 / 64 * relays 8 / 16 * inputs TCP/IP interface * Multiple card-reading technologies Flash memory *Using expansion board or expansion card Installation Installation and setup are completed within minutes. The reader and controller are dual-powered to prevent the lock from deadlocking on power loss. Once the power fails, a backup battery (up to 12 V-17 A/h) keeps the system running for several hours. LEDs indicate input, output and communication status. Expansion Cards 4 expansion cards are available •More relays for elevator management •More inputs/outputs •TCP/IP interface •Inputs/outputs and TCP/IP interface General features TPL3 TPL3D4 Network PC offline PC offline Programming Quick Access 8 or main controller Quick Access 8 or main controller Mini keypad and display Optional Optional Doors 2 4 Card readers 4 4 Relays (standard) Relays (expansion card) 4 16 4 16 Alarm inputs (standard) Alarm inputs (expansion card) 8 16 8 16 Current event records 4,000 4,000 Power supply 12V DC 12V DC LED (input, output, communication) Yes Yes Flash Optional Optional Communication RS232 RS485 TCP/IP Yes Yes Yes Yes Yes Yes Baud rate Up to 38,400 Up to 38,400 Access control features TPL3 series (TPL3, TPL3D4) Technology Any(*) Number of users Up to 40,000 Daily time zones 99 Weekly time zones 32 Holidays 40 Valid dates Yes Supervision Yes Counting and card usage limits Yes Local anti-passback Yes Local linkage Yes Elevator management Yes Cardholder monitoring Yes  (*) Multi-technology: the main card-reading technologies currently available (proximity, magnetic, barcode, contact, Wiegand, watermark, RF) or other technologies (hands-free, infrared, smart card, biometrics ...)   TPL3 series (TPL3, TPL3D4) Real-time alarm monitoring Yes Alarm programming Yes Alarm inputs Yes Repeat invalid-card-swipe logging Yes Door alarm Yes Duress alarm Yes   System Configuration Offline network with general-purpose PC   Technical Specifications PCB dimensions 158 mm x 149 mm Operating temperature -10Ħĉ to +55Ħĉ Operating humidity 20% to 90% RH Storage temperature -10Ħĉ to +65Ħĉ Storage humidity 10% to 90% RH PCB weight ** g Operating voltage 9.5 to 14 VDC Current consumption Max. ** mA without expansion board Max. relay load 24 V AC/DC 1 A Max. input voltage +/-30 V MTBF mean time between failures 44,000 hours MTTR mean time to repair 15 minutes