Shanghai bank automatic door installation & sensor door repair service center>> Welcome to (www.zitin.com/yhzdm +86 21 68568185£©
How to maintain bank automatic doors and service sensor doors by Shanghai Zitin? Bank automatic doors are ** increasingly common; many shopping malls and hotels choose automatic doors to enhance their corporate image and ** traffic flow. Below, Shanghai Zitin explains in detail how to maintain bank automatic doors and carry out daily **s.
Shanghai bank automatic doors Installation Sensor door repair Maintenance Zitin Service center£¨ www.zitin.com/yhzdm +86 21 68568185), Minsheng Bank, Bank of Communications, Industrial Bank, Agricultural Bank of China, Xiamen International Bank... for bank automatic door repair and sensor door maintenance and after-sales work. When the Shanghai Zitin editor read the following post, we just had to laugh!
Today I accompanied a friend to the ATM to withdraw money. You all k** those automatic doors at banks. My friend was in line, and with nothing to do I stood outside testing how the automatic door reacted. As the door was about to close, I foolishly stuck half my head in, and... you k**, my head got stuck. Only then did I realize the door was button-operated. Who on earth invented that? Enough said, it's too painful to talk about...
In a case like this, either the bank did not install pinching protection, or his head was outside the protection zone... anyway, it was his own doing. So how do you avoid this? Make both entry and exit sensor-operated and add pinching protection!
When a moving object approaches, the door opens and closes automatically; this is called a sensor door. Sensor doors are ** increasingly used in office buildings, factories, supermarkets, airports and other places.
A sensor automatic door is one whose opening and closing are controlled by sensing. By sensing method, it can be infrared sensor automatic door, microwave sensor automatic door, card-swipe automatic door or touch automatic door. Automatic doors are also divided into sliding automatic doors and swing automatic doors; sensing is one opening mode of automatic doors. By construction, automatic doors are divided into framed doors and frameless doors. The door body generally uses tempered glass, stainless steel plate, color-coated steel plate or other special materials.
As you k**, in recent years the sensor doors and automatic doors introduced by Shanghai Zitin - taking the sliding type as an example - are a kind of glass door widely used in shops, hotels and organizations. Their most direct feature is that they open automatically when a person or object approaches. When an object approaches, the door does not open. Sensor automatic doors are roughly divided into sliding, revolving and sliding-push types; among them, sliding and revolving types are best suited for installing sensors. Based on the environment and requirements of the installation site, you can consider choosing the automatic door configuration as follows.
1) Choice of sensor: in ** hotels and office buildings, a high-sensitivity sensor can be chosen; in places beside sidewalks such as banks and shops where people frequently pass, choose a narrow-zone microwave sensor (all sensors are adjustable).
2) Safety auxiliary devices: in ** hotels and similar places where pinching incidents must be prevented, anti-pinch infrared sensors can be installed.
3) Backup power supply: to ensure the automatic door keeps working during a power outage, a backup power supply can be installed.
How to maintain bank automatic doors and service sensor doors by Shanghai Zitin? Bank automatic doors are ** increasingly common; many shopping malls and hotels choose automatic doors to enhance their corporate image and ** traffic flow. Below, Shanghai Zitin explains in detail how to maintain bank automatic doors and carry out daily **s.
Daily maintenance and sensor door care methods for Shanghai Zitin bank automatic doors:
To check whether a bank automatic door has problems, start by observing the door body. Carefully inspect whether the door sill has scratches, whether the gaps between door leaves have changed, and whether any equipment shows signs of corrosion - these are all points to check carefully. For a bank sensor door to run normally, cleanliness is key, so there should not be excessive dust or debris near the door, as these will affect its normal operation.
After a bank automatic door has been used for a while, the operator housing must be cleaned; dust accumulates inside during operation and can cause problems, so cleaning is important. Regular cleaning also effectively extends the door's service life. Above all, whether cleaning or repairing, always switch off the power first so the work can be carried out safely.
During operation, the coordination of the various parts of a bank automatic door matters a great deal; for the door to open and close, the floor rollers are used, so these must receive long-term care and regular **. This prevents hidden faults and also avoids rust on the door.
Daily ** methods for Shanghai Zitin bank automatic doors:
1. The inspector walks toward the bank automatic door at a normal speed from outside or inside; the door should open automatically, and its movement should be smooth without any collision. After the door opens, when a person passes slowly through at about 1**mm-**mm per second, the door should stay open.
2. After the inspector leaves the sensor detection zone, the door should close automatically after a delay of 1-10 seconds (the delay can be set via the door's opening/closing parameters), and its movement should be smooth without collision.
3. Observe the normal walking path through the door; adjust the daily route so that people approach the door head-on rather than at an angle.
4. When approaching the door, the sensing width range of the sensor should be greater than the width of the fully opened door.
5. If the door is fitted with an auxiliary safety light sensor (infrared through-beam protection), when the door leaf is open and a person stands still and blocks the auxiliary safety light sensor with a hand, the door should stay open; within a few seconds after the hand is removed, the door should close again.
Shanghai bank automatic doors Installation Sensor door repair Maintenance Zitin Center ( www.zitin.com/yhzdm +86 21 68568185£© |
Current Location: Home >
